pad

Click to enlarge

Assembles Easily in Minutes! No Tools Required!

ASSEMBLY AND OPERATION

Assembly Instructions

Remove the filter elements and parts from their protective packaging, checking each item against the diagram. Note: The number of elements supplied will depend on the type of unit ordered.

Extreme cleanliness is important. Wash hands before proceeding. Assure that contamination of the components does not take place during assembly.

Fit the knob (1) onto the lid (2) by inserting the screw (3) up through the hole in the lid and screwing on the knob. Hand tighten only. Place the large sealing washer (10) over the threaded part of the element (5). Place the element (5) into the hole in the base of the upper chamber (4). Secure element in the chamber base by screwing on the wing nut (11) onto the threaded mount. Repeat #5 & #6 until all elements have been installed. Place one small washer (8) onto the threaded part of the outlet spigot (7). Insert thread of spigot (7) through hole in the side of the lower chamber (6). Place the second small washer (8) over the thread within the chamber and secure in place with the nut (9). Tighten securely by hand only. Put the upper chamber (4) onto the lower chamber (6) and place lid (2) in position. Ensure that the spigot (7) is in the "OFF" position.

gs1schem.jpg (16443 bytes)

CONDITION FILTERS: Wipe the ceramic dust from the outer surfaces of the filter elements with a damp cloth. Fill upper chamber (4) fully with cold or room temperature water and cover with lid (2). Allow all water to gravity filter into lower chamber. Open the spigot to allow all water to run to waste. Allow filters to stand unused overnight. Refill upper chamber again with water and open spigot for two minutes and allow water to run to waste. The British Berkefeld® water filter is now ready to use.

Note: If the filters are left to stand for more than 3 days, then it is recommended that water be run to waste for 1 minute before using. When installing filter elements for the first time or replacing a used element with a new one, it is important to condition the new filters using the above procedure.


Join Our Mailing List Today!

Do you like this website? Why not tell a friend? Click here to recommend it!
If you like this survival website, please recommend it to a friend. You could save a life. Click here.

Search our site:

Click Below To Go To Desired Section
Home | Water Filters | Meals Ready To Eat
| AlpineAire Gourmet Reserves
Self-Defense | CD's, Books, & Videos
First Aid Kits | Camping & Survival Gear
Affiliate Program | Membership Program
Fax/Mail Order Forms | Catalog Requests

    Online and Faxed Orders are taken 24 hours a day, 7 days a week:

  • To place your order through the Internet, please select the product/s and add to the shopping basket.
  • Fax us your completed Order Form at 1(972) 937-6385
  • ©1999 - 2007 Survival Instinct. All rights reserved. Use of this site is subject to certain terms of use which constitute a legal agreement between you and Survival Instinct, LTD.